MG-1A alumīnija sakausējums ar PTFE lentes pašeļļojošu gultni
MG-1A alumīnija sakausējums ar PTFE lentes pašeļļojošu gultni
Sākums >> Katalogi
>>
Metāla-polimēru kompozītmateriālu gultņi >> MG-1A alumīnija sakausējums ar PTFE lentes pašeļļojošu gultni
Marginal Bearing mg-1a alumīnija sakausējums ar ptfe lentes pašeļļojošu gultni Specializēts pašeļļojošu gultņu un bukses ražotājs Marginal Bearing, kas tika dibināts 2010. gadā, ir veltīts jaunu pašeļļojošu gultņu materiālu izstrādei un ražošanai.
This material structure enables the final parts tube lighter and easier for installation. Suitable for dry running,low coefficient of friction, lower wear, good sliding characteristics,the transfer film created can protect the mating metal surface,suitable for rotary,linear and oscillating movement.
◆ Technical Data:
| Technical Data | ||
| Max.load | Static | 80 N/mm |
| Very low speed | 40N/mm | |
| PV (dry running) Max. | Roatating oscillating | 20N/mm |
| Short-term operation | 2.8N/mm2·m/s | |
| Continuous operation | 1.8N/mm ·m/s | |
| Temp. limit | -65℃~+260℃ | |
| Friction coenncient | 0.05~0.20 | |
| Max. speed | Dry running | 1m/s |
| Hydrodynamic operation | >2m/s | |
| Thermal conductivity | 230 W(m·k)-1 | |
| Coenncient of thermal expansion | 24×10 ·K | |
sorry,there are no info now!
With aluminum metal backing, the bearing could be applied for OA machines,fitness equipment, bicycle,
motorcycle, food industry machinery andpackage machinery, which need light design.
